Protecting Vehicles

Active protection and control system enables the control center to offer real-time protection against:

Real Time Break-ins
If an intruder breaks into the vehicle, the sensors identify this event and transmit an alarm to the Control Center. The control center calls to the local forces to prevent the intruder from completing the break-in. In addition, the control center can immobilize the vehicle at any time using the Gradual Stop command.

Alarm system can connect through an external relay to the ignition and/or fuel pump and to disable it through a remote command. The relay immobilizes the vehicle gradually. The operator has the option to manually set the various parameters, just as: the pulses length, the numbers of pulses until the vehicle is fully immobilized, and the time from first pulse until a full stop. The thief will then gradually loose the ability to drive, just like in the case of running out of gas in the vehicle.

Vehicle Towing
Uunit includes a special algorithm on board to detect a towing using the GPS system. The end-unit can identify a change in the vehicle's location and immediately transmit a "towing message" to the control center.

Stolen Keys
Unit requires a secret code to be entered, either by using a special remote control, or a key pad, in order to avoid theft using the original vehicle keys. This code must be entered in order to start the vehicle. If an incorrect code is entered for a couple of times, the Control Center receives a "stolen keys" message and can react accordingly.